Logitech G Yeti 2: Worth the Upgrade?

Amazon links in this article are affiliate links. As an Amazon associate, I earn from qualifying purchases.

 
 

Quick Summary

 

Is the new Logitech G Yeti 2 worth buying? 

There are two scenarios here - if you already have the original Blue Yeti or if you don't.

  1. If you do not already have the original, I would just get the Yeti 2. It sounds extremely similar and it has just as sturdy of a build. However, it has a lot of cool modern features to let you customize the sound, and the mounting system is way better. 

  2. If you DO have the original Blue Yeti, I don't think it's a must upgrade. Honestly, it's a sidegrade. 

Changes from the Blue Yeti

  • First off, the Yeti 2 adds a small 1.3-inch display to the front. This replaces the physical buttons on the original. This lets you control several settings such as the volume, equalization, noise reduction filter strength, polar pattern, and signal cleanup effects. Mic mute is a capacitive button above the screen.

  • Secondly, the mounting system is a lot more streamlined. More on that in the build section.

  • Finally, the body has been changed from cold, hard metal to plastic. The stand is still metal at least. And the USB port is USB-C instead of USB mini B.

 

Audio Quality

 

The Yeti 2 has three 14 mm condenser capsules just like the Blue Yeti. This can record in 6 set polar patterns, but also auto-tracking with the proximity sensor and one custom polar pattern.

Yeti 2: no Filters
Blue Yeti: no Filters
Yeti 2: Auto Gain, Auto Tracking, Denoiser Max

The sound is very similar to the original Yeti, and during my testing, I could not reliably differentiate between the two in blind tests. So if you liked the Blue Yeti's sound, you'll also enjoy this one.

However, that also means it comes with all of the same weaknesses of the Blue Yeti. 

The Yeti 2 has a very treble dominated sound. It's very sensitive and it picks up a ton of detail. While that's great for vocalists in some aspects, here are the issues:

  • The sibilance with S sounds is insanely harsh. Fortunately, you can use EQ to contain this and there's also the de-esser. But out the box, it's really rough. 

  • This also picks up more background noise than any microphone I've ever used… tied with the original Yeti. 

When you look at the new features they've added, they're actually the most useful for trying to directly address those two problems. 

Blue VO!CE Features

Logitech G Hub is absolutely stacked with settings that you can use to adjust your mic’s sound. You get a 10-band parametric equalizer, but you can also use the simpler modes if you’re new.

You can adjust the gain (or use auto gain), change the polar patterns, and apply 6 different signal cleanup effects. There’s a de-noiser as well. It’s not as good as SteelSeries Sonar’s implementation, but the software itself is a lot less intrusive when it comes to trying to hijack other audio sources, so it gets a pass.

All the settings can be saved to the microphone itself so you can use it on other devices with the same sound profile without having to open G Hub again.

Build

The build quality is the only place where the Blue Yeti has a distinct advantage. The original Yeti is made of heavy, solid metal. The Yeti 2 has similar metal for the stand, but the mic itself is a lot softer. Honestly, I’m not sure exactly what material it is, but it feels like plastic.

On the flip side, the clunky mounting system of the Yeti would often leave a bunch of ring shaped pieces falling everywhere. That’s been streamlined on the Yeti 2. Now there are rubber pads to protect the mic from the stand screws and there are stoppers to fill in the screw holes when you need to mount it to a boom arm.

The 5/8 inch threading and 3.5 mm ports are the same. The Yeti 2 has finally upgraded to a USB-C port.

Original Yeti with a bunch of redundant rings.

Yeti 2 cleaner mounting system.

The buttons on the rear are gone now.

USB-C and 3.5 mm port for low latency monitoring.

Verdict

The Yeti 2 is not my favorite microphone. The background noise pickup and harsh sibilance from the original Blue Yeti are still intact.

If you have to choose between the two, I’d get the Yeti 2 over the original simply because of the new features. However, if you already have the original, there’s no need to spend the extra money.

BadIntent

I’m a longtime tournament competitor. I’ve won multiple regional championships for games such as Pokémon and Samurai Shodown. I buy and review all the products displayed on this site. No brand deals. No shilling.

Next
Next

Razer Seiren V3 Pro | Razer’s Best