Razer Seiren V3 Pro | Razer’s Best

Amazon links in this article are affiliate links. As an Amazon associate, I earn from qualifying purchases.

 
 

Quick Summary

 
  • Vocals on the Razer Seiren V3 Pro are crisp with lots of detail.

  • Razer Synapse has an equalizer and a ton of signal cleanup effects.

  • This mic can output both USB and XLR audio simultaneously. 

  • The zinc build is super sturdy, and it's a dynamic microphone with a huge 30 mm capsule.

Specifications 

  • Capsule: 30 mm dynamic

  • Polar pattern: cardioid

  • Frequency response range: 50 Hz - 16 kHz

  • Bit depth and sample rate: 32-bit float while using Razer Synapse, otherwise 24-bit. 96 kHz sample rate.

Audio Quality 

Razer Seiren V3 Pro USB with Noise Suppression
Razer Seiren V3 Pro USB (raw)
Razer Seiren V3 Pro XLR (raw)

Unlike some of my favorite older Razer mics like the Razer Seiren Elite and Razer Seiren V2 X, this mic focuses on clarity rather than having a warm and rich sound.

Consequently, it's very sibilant with S sounds and outside of my PC fans and the ventilation fan, it also picks up reflections of my voice from my wall quite prominently. That said, it’s not nearly as bad with these issues as the Blue Yeti or Yeti 2.

USB vs XLR

In my experience, the USB and XLR audio sound almost the same, but there is a slight increase to the bass when used USB. Specifically, everything under 250 Hz.

However, I used the XLR output of this mic through the Elgato Wave XLR MK.2. Since there are two variables here, I can't definitively say the USB output has more bass than the XLR output with all interfaces.

Razer Synapse Software

Razer Synapse has a ton of features. There’s an 8-band parametric equalizer. Additionally, you can control the AI noise suppression, noise gate, limiter, and compressor. The main limitation is that Synapse has to be open to enforce them.

The same is true for the different lighting effects. Once you exit out of Synapse entirely, the lighting effects revert to their default.

Build

The Seiren V3 Pro has a hefty, sturdy build made of zinc. The yoke has 5/8-inch threading on the bottom. It looks like there's smaller threading inside also, but it's so deep I couldn't really verify the size.

The USB and XLR ports are on the bottom. There’s also a 3.5 mm headphone jack input for low latency monitoring. The volume wheel controls the gain instead of the mic monitoring. I have it maxed out at 40 db. The capacitive mute button turns both the icon and ring red when you activate it.

Verdict

 

Overall, the Razer Seiren V3 Pro is an excellent sounding mic with a ton of features and a solid build. Do I recommend it? Here's the thing… It's $250. There are too many mics that sound just as good for half the price or 2/3 of this.

Examples are the Elgato Wave:3 MK.2, Wave DX, and Shure MV6.

So if you're a Razer fan, then yes cop it. Otherwise, only if you're loaded but for some reason don't want the Shure SM7B.

BadIntent

I’m a longtime tournament competitor. I’ve won multiple regional championships for games such as Pokémon and Samurai Shodown. I buy and review all the products displayed on this site. No brand deals. No shilling.

Previous
Previous

Logitech G Yeti 2: Worth the Upgrade?

Next
Next

Razer Kiyo V2 Pro | The Mighty has Fallen